Frequently Asked Questions ?
- Can Mac OS X Lion be used
- Version overview and known bugs
- Difference between Lite and Paid version
- How do I get a VNC Password
- Is UltraVNC MS Logon supported
- Can a RealVNC Enterprise server (in paid mode) be used
- Is there a limit to the server screen size
- Is SSH-2 Tunnel supported
- Are multi screens server supported
- Do you support the Vine Server
- How to configure VNC for Mac OS X
- Where to find VNC Servers for Windows/Linux
- VNC and Windows 7/8/10
- How to use different displays in VNC for Linux
- How to find the IP address on a Windows PC
- How to remove Mocha VNC from the iPhone
- How to use a dynamic IP address
- How to connect to your PC/Mac from the Internet
- Managing your SunRay using your iPhone VPN and VNC
- What is my router IP Address
- Black bar with buttons disappear
- Cannot make a connection to the XP PC
- Program crash, when tapping mouse or keyboard icons
- Cannot make a connection to the Server
- It keeps reporting negotiation
- Host has closed the session
- How do I get a VNC Password
- I can see the desktop in Mocha VNC, but mouse and keyboard does not work
- Screen does not refresh
- RealVNC 4.4.2 hangs in negotiation
- Keys as / @ : ; does not work
- Right click on Mac OS X Tiger does not work
- All keys in the horizontal scroll list of keys above QWERTY keyboard are enabled
- Extra keys as ALT, CTRL, Option and the Apple key
- Support for right mouse button, hover and mouse wheel
- Ctrl+alt+del key. Needed if using Win 200x as a VNC Server
NO-IP The basic version of the service is free.
NO-IP Click here to see your current router IP address.
My Mac OS X Workstation has a fixed IP address on the local network (wifi) at 192.168.2.2
In the router firewall configuration I have configured, if it receives data on port 5900, forward it to 192.168.2.2.
When on the EDGE network with the iPhone, I will in mocha vnc as VNC server IP write
VNC Password is the Password I have defined on the Mac in Screen sharing , see How to configure VNC on Mac OS X
- 126.96.36.199 , and as port 5900 (Not the IP address for the Mac!)
With canyouseeme.org it is possible to check if the router has been configured to allow port 5900 access. At field What port type 5900, and click [Check]. In the center of the page the result is shown (below some google ads)
If you open the router for port 5900 access, make sure to use a proper password in the Mac screen sharing , or your system will be at high risk.
- VNC Password
- Encryption: Prefer off
and it can be used as a normal VNC Server
- Wrong password, or a VNC Server type/version which is not supported
- Some VNC Servers support other user/password validation. Make sure the VNC Server is configured for VNC Password
- If the iPhone is not using wifi, but only the EDGE network, the IP address for the VNC Server given in Mocha VNC must be your Home router IP address.
The router must also be configured to forward port 5900 traffic to your Mac/PC. To open port 5900 could be a security risk. Check the router manual for advice.
- Wrong IP address for the VNC Server. The IP address shown in the Mac OS X Remote Management may be a name only known to the DNS for the Mac, not the iphone. In Mac:System Preferences - Network, the IP address for the Mac can also be located.
- The VNC Server has not been started
- A firewall stopping access on port 5900. A firewall may run on the PC/Mac
- Have installed PeerGuardian on the Mac/PC, and configured it to block some IP addresses.
- The iPhone/iPad is not on the same network as the VNC Server. If using wifi, check wifi is enabled on the iPhone and not only the EDGE network. Also it is the same wifi network as your PC/Mac , and not your neighbors network.
- If the iPhone is not using wifi, but only the EDGE network, the IP address for the VNC Server given in Mocha VNC must be your Home router IP address. The router must also be configured to forward port 5900 traffic to your Mac/PC. To open port 5900 could be a security risk. Check the router manual for advice.
RealVNC . They have a freeware and a paid version. The paid version is needed if using Windows 7/8/10.
- Type "cmd" (without quotes) and hit enter
- A black DOS box is shown with a prompt
- Type ipconfig and hit enter
Some VNC Servers can have problems with refresh. If problems is seen with a VNC Server and it is not a beta version, please write a mail to our support function. Include full VNC server name, version and OS type.
- Authentication: VNC Password
- Encryption: Prefer on
- The Password select in [Configure] is the same as in Mocha VNC
If using a VineServer on Mac, the shift keys will not work. We do not support the VineServer, only the VNC Server which is part of Mac OS X.
Display 0 = 5900
Display 1 = 5901
Display 2 = 5902
The port number can be configured in mocha vnc , connect window.
- A firewall on the PC/Mac stopping port 5900 access
- Wrong VNC Password. Check if it is the same on the Server and Mocha VNC<
- If using a Mac, (x) all users must be selected. See How to configure VNC on Mac OS X
- If using a Mac, the 32 bit color option must be enabled (connect dialog in Mocha VNC)
- If using UltraVNC, notice MS Logon supported is not supported in Mocha VNC
- Configure the desktop with a smaller screen. A screen size around 1000x1000 gives a good result
- Use 8 bit color mode (connect window). Mac OS X Remote Management supports only 32 bit, and will fail in 8 bit mode
- Use wifi and not the phone network
- If using a Windows or Linux PC, try different VNC Servers. RealVNC in paid mode could be a good choice
Mac OS X page.
If it is a PC, you must first install a VNC Server on the PC. Try RealVNC for Windows and Linux
RealVNC Enterprise Edition. They offer a trial version.
UltraVnc also has a new free version for Windows 7/10/11 at www.uvnc.com TightVnc has a beta v 2.0 which can run on Windows 7 at www.tightvnc.com Tip: In Realvnc Enterprise Edition select,
- VNC Password
- Encryption: Prefer off
- iPhone firmware 2.0 or 2.0.1 installed on your iPhone
- Mocha VNC Lite or Paid version
- Your SunRay VNC file edited
- VPN Setup on your iphone for your corporate network
- Install Mocha VNC on the iPhone
- Edit your xstartup file in your .vnc directory on your SunRay to control your SunRay Desktop from your iPhone
On your SunRay go to Launch>> Run Applications
* In the “Run Applications window type the following command
* gedit /home/homedirectoryname/.vnc/xstartup
* Example: gedit /home/jmathers/.vnc/xstartup (space after gedit)
* Click on “Run”
* Within Text Editor,
* Now do a File>> Save
* Then do a File>>Quit
* This (only needs to be done one time for setting up your Sunray for future VNC sessions) Your would reedit the xstartup file if you only wanted to VNC into a terminal window on your SunRay and put the ”twm&” command back in to the file.
- Go to your SunRay and start a VNC Session
* Login to your SunRay
* Go to Launch>>Applications>>Utilities>>Terminal
* Type in vnc start hit return
* Enter a password of at least 6 characters hit return
* (Verify) Re enter the password hit return
* Your VNC Session will now start on your SunRay
* Write down the information in the “xmessage in the upper left hand corner.
* Example: Started on “stb1-usdk04-06:1”
* Once you write that server string down, you can click on the “Okay” button
* Now you must translate that to an actual IP Address for your iPhones VNC
* Move the VNC session out of the way on the Sunray and start another terminal window. Go to Launch>>Applications>>Utilities>>Terminal
* Type in nslookup hit return
* Type in nameofyourserver hit return
* (Example tb1-usdk04-06 hit return)
Your IP address for the server with your SunRay VNC Session will come back and says example:
* Results will look like Name: tb1-usdk04-06.network.com
* Results will look like Address: 188.8.131.52 (Write this IP address down for your iPhone)
* Quit the nslookup command by typing exit
* Write down the IP Address, and the password your gave your VNC session
- Go to your iPhone and login to VPN, connecting you your network
- Once logged into VPN on your iPhone, click on the HOME button and click on the “VNC Lite” application button
* Click on “Connect” to configure your iPhone VNC for your SunRay
* VNC Server IP address = (The IP address you wrote down for your SunRay)
* VNC Server Port =
Look at your SunRay VNC Session and at the top of the window there is a bar and it will have VNC information, you have to translate this to the proper port and it is simple
Example: VNC: tb1-usdk04-06:1 (jmathers)
All your care about is the number after the colon (in this case :1 )
Port Conversion formula ( port = display + 5900
· Display 0 = 5900
Display 1 = 5901
Display 2 = 5902 and so on and on
(My session had the number “1” after the colon, so my port is 5901)
· VNC Password = (This is the password you wrote down from your SunRay VNC Session) You made the password when starting the SunRay VNC Session
· Click on “Connect”
· It should take a few seconds to display your SunRay desktop
You now have full control of your SunRay from your iPhone
- To exit your iPhone VNC session, Click on the “+” symbol and tap on “Disconnect”
- To exit your VNC session on your SunRay. Go back to your SunRay and click on the “X” in the upper right hand corner of your VNC window. This will close your session.
Copyright (c) 1997-2023 MochaSoft Aps. All Rights Reserved.